APA-480 - 600 WATTS - Installation PA Power Amplifier
(AHUJA)
1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
100V input is provided for connecting another amplifier’s output in long line applications.
Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
Resettable circuit breaker for protection against overload and short circuit.
Loop through output for connecting another booster amplifier.
19” Rack mountable chassis.
Instant transfer to DC power (Car Battery) if AC power fails.
Power Output
• 750W Max.
• 600W RMS at 10% THD
• 550W RMS at 5% THD
• 500W RMS at 2% THD
• 480W RMS at 1% THD
Output Regulation
• ≤ 2dB (No Load to Full Load at 1kHz)
Input Channels
• 1 × 200mV / 470kΩ (Unbalanced)
• 2 × 1V / 50kΩ (Balanced)
• 1 × 100V Input / 50kΩ
Frequency Response
• 50–15,000Hz (±3dB)
Signal to Noise Ratio
• 60dB
Tone Controls
• Bass: ±10dB at 100Hz
• Treble: ±10dB at 10kHz
Outputs
• Loop Through: 1 × 200mV / 600Ω
• 2 × 1V / 1kΩ
Speaker Outputs
• 4Ω, 8Ω, 70V & 100V
Power Supply
• AC: 220–240V, 50/60Hz
• DC: 24V (2 × 12V Car Battery)
Power Consumption
• AC: 1200VA
• DC: 15A
Dimensions
• W485 × H142 × D510 mm
Weight
• 32.20kg
